Select Page

SAKRETE® Mortar Mix

SAKRETE® Mortar Mix

Type N Mortar Mix is a preblended mixture of sand and masonry cement or sand, lime and portland cement. For laying brick, block and stone in non-load bearing walls. For tuck pointing or repairing existing mortar joints. Can also be used for scratch and brown coat in stucco applications. Meets property requirements of ASTM C270 and C1714.

USE: For the construction of masonry walls using concrete block, clay brick, screen blocks, glass block and stone. Ideal for stucco repairs and repointing old mortar joints. Sets in 4-6 hours.
YIELD: One 25 kg (55 lb.) sack will provide enough mortar for approximately 25 standard clay bricks or 10 standard blocks with a 10 mm (3/8 inch) mortar joint.

SKU: 100021875 Categories: , ,
Product added to Quote successfully!
View Quote


  • 25 kg (55 lbs)
  • 56 bags per pallet
  • Pallet weight: 1425 kg

  • Adhering to recommended water additions is very important. Exceeding the maximum recommended water content per sack will result in inferior physical properties. Concave mortar joints are recommended for all exterior applications. Other decorative joints may be used for effect but are not recommended for maximum weather tightness and durability.
  • Liability for damages or defective goods shall be limited to the refund of the purchase price or product replacement.
  • New concrete must be kept above 5 degrees Celsius until cured.
  • Building a block or brick wall
  • Installing stone brick veneer
  • Repairing block or brick mortar joints
  • Stucco repair


See How It Works


Pin It on Pinterest